BJTRS - ELCO 11A
- MSDS: BJTRS
- Manufacturer: ELCO CORP
- Product Name: ELCO 11A
- National Stock Number: 9150-00F014150
Product Identification
Product ID:ELCO 11A
MSDS Date:04/28/1987
FSC:9150
NIIN:00F014150
MSDS Number: BJTRS
Responsible Party
Emergency Phone: (313) 358-5800
Info Phone: (313) 358-5800
Cage: 17424
Contractor
Telephone: (313) 358-5800
Cage: 17424
Ingredients
ZINC DIALKYLDITHIOPHOSPHATE & ZINC DIARYLDITHIOPHOSPHATE
CAS: 68049-42-3
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT): 2000 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION/EYES/SKIN: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION/EYES/SKIN: IRRITATION.
First Aid
First Aid:EYES/SKIN: WASH W/COPIOUS AMOUNTS OF WATER. INHALATION:
REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL RESPIRATION.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:COC
Flash Point:239F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER SPRAY
Fire Fighting Procedures:EVACUATE AREAS DOWNWIND FROM FIRE. WEAR
SELF-CONTAINED BREATHING APPARATUS.
Accidental Release
Spill Release Procedures:REMOVE SOURCES OF IGNITION. SOAK UP
W/ABSORBENT, SWEEP UP, & DISPOSE OF IN CLEAN DRY COVERED CONTAINER.
WEAR PROTECTIVE EQUIPMENT.
Handling
Handling and Storage Precautions:DON'T STORE >100F. (LONG DURATION).
KEEP CONTAINERS CLOSED WHEN NOT IN USE. DON'T USE IN POORLY
VENTILATED OR CONFINED AREAS.
Other Precautions:THIS MATERIAL IS HEAT-SENSITIVE & WATER-SENSITIVE.
REMOVE SOURCES OF IGNITION.
Exposure Controls
Ventilation:LOCAL EXHAUST
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:DECOMPOSES
Spec Gravity:1.17
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER LIQUID W/ALCOHOL LIKE ODOR.
Percent Volatiles by Volume:0%
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS, BROMINE, CHLORINE, HYDROGEN PEROXIDE, &
WATER
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES, SOURCES OF
IGNITION, & TEMPERATURES >100F
Hazardous Decomposition Products:CO, CO2, OXIDES OF SULFUR, HYDROGEN
DIOXIDE, OXIDES OF PHOSPHORUS, PENTOXIDE, & SULFUR
Disposal
Waste Disposal Methods:DON'T FLUSH INTO SEWER. BURN UNDER CONTROLLED &
APPROVED METHODS OR BURY IN APPROVED DISPOSAL SITE WHICH COMPLIES
W/LOCAL, STATE, & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.